3D Gameworlds: Build Tips N tricks Part 3 & 4

Build Tips N tricks Part 3 & 4

Part 3
lets say you already have a wall build and u want to make a gate( i have noticed many rooms arent perfectly connected cause ppl drop props randomly n then they try fine tune them to fit perfect but most cases they dont ^^ )

here is a quick tip/trick to make it perfect

here is our pink wall n we try connect perfectly that white gate(prop)

that white prop is 2 propsanyway not important .

so how we will conect it perfectly ...

1st we choose the white prop that u will see in the pic bellow then we select the hand tool n place the prop in the wall...

we rotate the prop at 90 degrees angle using Pivot

then we move the prop at the 0.25 snap step that we have selected and we have a perfect match

i copied the prop rotated and make this gate and continued my wall

muacks

Part 4

Lets move to more advance tools

- here i talk about the trasnform tool

so u wanna connect some stairs perfectly (see pic bellow)

in this situation we try connect those stairs in the blue wall so u can go up there but we want a perfect match

-1st important whenever u start a build u always have set snap values

so what we wanna do here is open the trasnform tool and we gonna copy/paste the blue Y value to the stairs (Y) stands for hight

so i select blue wall -go to trasnfor tool copy the Y value then click the stairs n paste that value

and stairs go down like pic bellow

Now since i had set snap values from start on 0.25 snap step and knowing blue wall is 1 i only have to enable the snap step magnet so i every time i move stairs up it will move on 0.25 value